Pumpkin

Even though its the last few days of August and today is reaching high 100's, I am supper excited and cant wait for fall.  As I was searching for Fall bows or clippies I came across this clippie on You Tube.

You Need

Orange grosgrain ribbon 9 inches
Brown grosgrain ribbon to line alligator clip of your choice (around 4 inches)
Green grosgrain ribbon 2 inches (will end up 1 1/2 inches after flag cut)
Green corker grosgrain ribbon (6 loops(I will explain below))
The ribbon is 3/8 inch grosgrain

Necessary Bow making tools

The 2 inch green piece you fold in half and cut diagonal starting at the folded edge. if will look like a double flag, if you cut the wrong way it will be reversed like arrows. The piece ends up to be 1 1/2 inches after its cuts which is just about perfect.

To make your corker ribbon preheat your oven to 250 and roll the ribbon around a dowel and use cloths pins at the end, put on a lined cookie sheet and bake for 20 minutes.

That's the sheet I use all the time I wrote it down so I wouldn't forget. I don't get to do much crafting so I tend to forget.

The dowel I used is 1/4 inch wide.

I bought a tub of different sizes on clearance at Hobby Lobby a while back = AWESOMENESS

The end result after cooling it.  You will need 6 curls that will end up being trimmed to about 4 after you attache to your pumpkin.

Keep reading. LOL

The picture below is how I estimate my bow loops, its not glued in the below picture, I am just looping and seeing if 9 inches is enough for what I want.

You can adjust and add more ribbon for bigger loops.

Add small amount of glue to the seem and make your first loop.

An alligator clip can also help squeeze it tell the hot glue dries, helps to save your fingers.

I adjust and see how it will look each time.

Oh yeah don't forget to heat seal edges with device of your choice. (lighter, candle, or wood burner)

Second loop, again add a small amount of hot glue right about the first loop.

Your just keeping the glue together in one area, and keeping the circles aligned.

Make sense, I hope so, I don't know Bow/Clippie terms.

Next and final loop.

Green 1 1/2 inch flag piece glued over the top.

Heat seal quickly to keep the flag shape.

That's about 6 loops, heat seal edges with lighter or heat source of your choice

Going under you will make a single knot.

TaDa, not to tight so you don't bunch up your orange circles.

Adjust curls and add a dab of hot glue under knot, this will help to secure knot and make your curls do what you want them to do.

Lined alligator clip of your choice with about 4 inches of heat sealed brown grosgrain ribbon

Pick the side you like best and put glue on opposite side.

Hot glue on the green part because that is the thickest part of your bow.

I sorta tilted it but not much.

Cream colored head band with Pumpkin = LOVE

Sleeping Miss Alivia with head band on top of her head.  LOL

The original pumpkin clippie from Hair Hardware

I got the bright ribbon from Etsy